| |
| BOSIK
ARM VBA |
 |
|
BOSIK VEHICLE BARRIERS LIMITED
designs, manufactures and installs vehicle
barrier systems (VBS) that are the first line of defense in
your perimeter security system. Every entranceway is unique
and has different security concerns. BOSIK can customize the
design of a barrier system that will guard against your anticipated
security threats and protect your perimeter effectively and
reliably.
Our vehicle barrier systems are marketed and used to protect
high profile security areas in North America and throughout
the world.
|
BOSIK ARM VBS
Unlike traditional pole gates, the Bosik Arm VBS is designed
to stop unauthorized passenger and commercial vehicles from
crashing through an entranceway. The force from the striking
vehicle is transmitted from the pole to the anchors and foundation,
thereby preventing the vehicle from penetrating the secured
area.
|
PRODUCT
HIGHLIGHTS
• Standard or Custom design to suit a variety of vehicle
threats
• Easy installation on pre-designed footings (BOSIK can
assist on anchorage design)
• Highly visible barrier arm
• Weather resistant against rain, snow, ice and sand
• Above ground mounting enables anchorage on virtually
any sub-surface
• No underground pipes, plumbing or pumps
• Excellent access to components for easy maintenance
• Hydraulically powered with manual override
• Lift rate of 7– 15 seconds
|
BOSIK
ARM VBS TECHNICAL SPECIFICATIONS |
| Ratings
(Typical) |
•
5,000, 15,000, 26,000 lbs. vehicles (Note: 50,000 lb.
rating available upon request) Typically traveling
up to 50 mph. |
Pole
Motion/Control
|
•
Hydraulic |
| Speed
of Operation |
•
Up or down, approximately 7-15 seconds |
| Power |
•
280/ 230/ 460/ 600 VAC, 3 phase, 60 Hertz
• 220/ 380/ 440 VAC, 1 phase, 50 Hertz
• Other voltages available |
| Size |
•
Up to 25’ roadway for single barrier.
• Bar Height – 24" - 30" (customized
to suite) |
| Power
and Controls |
•
One-push button control (Can provide as many as required)
• Panel and wiring included as required |
| Other
Controls |
• Dry contacts
provided for easy interfacing with other access control
systems (i.e. card access) and other sensors
(mass detectors, photodiodes, etc.) in control panel typically
located in guardhouse
• Temperature regulation/control for reliable operation
in both cold or hot environments (As required)
• Emergency Back-Up: Manual operation of barrier
using a hand - pump with release valve
in event of a power failure |
| Options |
•
Emergency power - generator at additional costs
• Stop Signs
• Traffic Lights
• Colour
• Stop device sensor will prevent pole from closing
on vehicle |
| Training
and Commissioning |
•
Operation and maintenance manuals provided
• Full training of security personnel on operation
of barrier
• One year warranty
• Operation and maintenance manuals provided
• Full training of security personnel on operation
of barrier
• One year warranty |
|
| |
For an Adobe Portable Document Format (PDF) download
of the Vehicle Barrier Arm, click
here .
If you require the free Adobe Acrobat Reader software to access
the above PDF, click
here . |
|
|
